Table Legs – How to Fix a Leg Top Plate to a Table Top

All Eurofit Systems table legs will be supplied with the appropriate fixings to allow the fitting of legs to table tops. We have two different types of fixings.

Standard table legs

These legs use a separate top plate that screws into a plate inside the top of the tube. Place the table top on a clean workbench and on the underside of the top lay all the legs in the correct position and mark the fixing holes with a pencil then pilot hole each or use a bradawl. Place the top fixing plate with the bolt sandwiched between the table and plate and using a Pozi screwdriver fit the supplied screws, please note that the screws are to suit 25mm material and will break through thinner tops.

Coffee table conical legs

These have a welded plate attached to the top of the tube. Place the table top on a clean workbench and on the underside of the top lay all the legs in the correct position and mark the fixing holes with a pencil then pilot hole each or use a bradawl. Place each leg at the appropriate position and using a Pozi screwdriver fit the supplied screws, please note that the screws are to suit 25mm material and will break through thinner tops.

Click here to view our Table Legs.